Toyota Tacoma Aluminum Flatbeds
A flatbed that lets a Tacoma work like a bigger truck
The Tacoma is one of the most popular trucks we put aluminum beds on. Swapping the factory box for an Alumbody flatbed or stake bed gives you a flat, square deck that is wider than the stock bed, with gates that fold down or lift out so you can load from the sides instead of reaching over the bed rails.
Most Tacoma beds we build are 6' wide by 6'6" long, with 6' × 7' and 6' × 7'6" for longer frames. Because aluminum weighs so much less than steel, a Tacoma flatbed keeps more of the truck's rated payload free for tools and material, and it never rusts — even on a truck that lives near the coast.
- Most common sizes: 6' × 6'6", 6' × 7' and 6' × 7'6"
- 22" fold down gates or 30"–33" lift out stakes
- Keep your factory bumper or add a dock style bumper
- Topside and underbody aluminum tool boxes
- Pool route beds with low 9" fold down gates
2020 Toyota Tacoma with a 6×76 aluminum body, 22" fold-down gates using the factory bumper with added wheel track in the bed
Other Toyota trucks we build for
Tacoma bed sizes we build
These are the sizes our Tacoma customers choose most. Not sure what fits? Send us your year, cab and wheelbase and we'll recommend the right deck.
Popular Tacoma configurations
- Flatbed with 22" fold down gates using the factory bumper
- Stake bed with 30" or 33" lift out gates and a dock style bumper
- Flatbed with two 16" × 13" × 72" topside tool boxes
- Pool truck bed with 9" solid fold down gates and stainless steel hardware
| Bed size | Where we've built it |
|---|---|
| 6' × 6'6" | Our most common Tacoma bed — flatbed or stake bed |
| 6' × 7' | Longer deck for long-bed frames; popular with dock bumpers and pool route beds |
| 6' × 7'6" | Stake bed with 30" lift out gates on a 2018 Tacoma |
| 6' × 5'6" | Short deck with 30" lift out stakes on a 2005 Tacoma |
Why Tacoma owners choose Alumbody
Lighter than steel
Less bed weight leaves more of the truck's rated capacity for the work you carry.
Won't rust
High strength 6000 series aluminum stands up to salt air, rain and road grime.
Load from the side
Fold down gates and lift out stakes open the deck from every side.
Built for your Tacoma
Each bed is measured to your cab, frame and wheelbase, then built in Orange, CA.
Tacoma builds gallery
Real Alumbody beds for Tacoma trucks. Select any photo to see it full size and browse all 15 builds.
Every Tacoma build in this gallery (15)
- 2020 Toyota Tacoma with a 6×76 aluminum body, 22" fold-down gates using the factory bumper with added wheel track in the bed
- 2018 Toyota Tacoma with a 6'X7'6" Alumbody stake bed, 30" lift-out gates, dock bumper
- 2017 Toyota Tacoma with a 6'X6'6" Alumbody stake bed, 33" lift-out gate using the factory bumper and customer-supplied cabinets
- 2017 Toyota Tacoma with a 6'X7' Alumbody stake bed with 33" lift-out gates and dock bumper
- 2015 Toyota Tacoma with a 6'X7' Alumbody stake bed with 30" lift-out sides, 22" fold-down rear gate, and dock bumper
- 2015 Toyota Tacoma with a 6'X6'6" Alumbody flat bed, 22" fold-down gates using the factory bumper
- 2014 Toyota Tacoma with a 6'X6'6" Alumbody stake bed, 33" lift-out gates using the factory bumper
- 2013 Toyota Tacoma with a 6'X7' Alumbody aluminum flat bed, 22" fold-down gates and dock bumper
- 2010 Toyota Tacoma with a 6' × 7' Alumbody aluminum pool truck bed with 9" solid fold-down gates using stainless steel hardware and dock bumper
- 2009 Toyota Tacoma with a 6'X6'6" Alumbody flat bed, 22" fold-down gates using the factory bumper
- 2009 Toyota Tacoma 6’ X 6’6” aluminum flat bed with 22″ fold-down gates, factory bumper retained, and an aluminum tool box 14” X 12” X 18”
- 2006 Toyota Tacoma with a 6'X6'6" Alumbody stake bed, 22" lift-out gates using customer-supplied off-road bumper
- 2006 Toyota Tacoma with a 6'X6'6" Alumbody flat bed, 22" fold-down gates using the factory bumper
- 2005 Toyota Tacoma with a 6'X 5'6" Alumbody aluminum stake bed with 30" lift-out stakes using the factory bumper
- Toyota Tacoma with a 6’ X 7’ Alumbody aluminum flat bed with 2 topsider tool boxes 16” X 13” X 72” with custom shelves
Tacoma truck bed questions
What size aluminum flatbed fits a Toyota Tacoma?
Most Tacoma beds we build are 6' wide by 6'6" long. Longer frames take 6' × 7' or 6' × 7'6". We confirm the size against your truck's year, cab and wheelbase before quoting.
Can I keep the factory bumper on my Tacoma?
Yes. Many of our Tacoma builds reuse the factory bumper. A dock style bumper is the other common choice if you back up to loading docks or want a flat step at the rear.
Can a Tacoma flatbed have tool boxes?
Yes. We add underbody boxes beneath the deck and topside boxes along the sides — for example two 16" × 13" × 72" topside boxes on a 6' × 7' Tacoma flatbed.
Can you ship the bed if I'm not in Southern California?
Yes. We install beds at our shop in Orange, California, or ship them anywhere in the U.S. palleted, shrink-wrapped and freight insured.
How do I get a price?
Use our online quote form or call (714) 602-6970 with your truck's year, make, model and cab, plus the gates and options you want. We email or text a firm quote within 2 business days.
Related pages
- All Toyota bedsEvery Toyota model we build aluminum beds for.
- Flatbed size guideBed sizes we build for every common truck.
- Stake bed gatesFold down and lift out gates explained.
- Stake bed vs. flatbedWhich deck suits the way you load.
- Aluminum flatbedsSpecs, weight and options on every Alumbody flatbed.
- Get a quoteFirm quote by email or text within 2 business days.
Ready for a custom Tacoma aluminum bed?
Tell us your truck and the job — we email or text a firm quote within 2 business days.